Caradisiac® utilise des traceurs (cookies et autres) pour assurer votre confort de navigation, pour réaliser des statistiques de visites ainsi que pour vous proposer des services et des publicités ciblées adaptés à vos centres d’intérêts. En poursuivant votre navigation, vous en acceptez l'utilisation. Pour plus d’informations et paramétrer vos traceurs : En savoir plus

 
Publi info
   / / /

Code panne Doblo 1,3l multijet

 

Il y a 70 utilisateurs connus et inconnus. Pour voir la liste des connectés connus, cliquez ici
Ajouter une réponse
 

     
Vider la liste des messages à citer
 
 Page :
1
Auteur
 Sujet :

Code panne Doblo 1,3l multijet

Prévenir les modérateurs en cas d'abus 
Ethan-Boat
Profil : Apprenti
ethan-boat
  1. Posté le 30/05/2017 à 07:05:38  
  2. answer
  1. J'aime0
  2. Prévenir les modérateurs en cas d'abus
 
Publicité
Bonjour j'ai 2 codes pannes sur mon doblo

- P0747 fuel pressur regulator
- P0748 fuel pressur regulator

Je voulais savoir si cela vient forcement du régulateur ou si cela peut venir d'autre chose. Également je voudrais savoir oû ve trouve ce régulateur.

Merci d'avance :)

Sujets relatif
Profil : Apprenti
ethan-boat
  1. Posté le 31/05/2017 à 23:44:55  
  2. answer
  1. J'aime0
  2. Prévenir les modérateurs en cas d'abus
 
Up :/

Profil : Apprenti
ethan-boat
  1. Posté le 02/06/2017 à 12:39:27  
  2. answer
  1. J'aime0
  2. Prévenir les modérateurs en cas d'abus
 
Personne ? :/

Profil : Routard confirmé
rq3zqtb
Marques - succès bronze messages
  1. Posté le 02/06/2017 à 13:18:45  
  2. answer
  1. J'aime0
  2. Prévenir les modérateurs en cas d'abus
 

P0747 - Pressure Control Solenoid 'A' Stuck On



Repair Importance Level: 3/3
Repair Difficulty Level: 3/3



Possible causes


  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty Pressure Control Solenoid
  • Pressure Control Solenoid harness is open or shorted
  • Pressure Control Solenoid circuit poor electrical connection

Tech notes


When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

When is the code detected?


The gear required by the Engine Control Module (ECM) does not match the actual gear when driving

Possible symptoms


  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission shift shock

P0747 Description


The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).



P0748 - Pressure Control Solenoid 'A' Electrical



Repair Importance Level: 3/3
Repair Difficulty Level: 3/3

Possible causes


  • Dirty transmission fluid
  • Low transmission fluid level
  • Faulty line pressure solenoid valve 'A'
  • Line pressure solenoid valve 'A' harness is open or shorted
  • Line pressure solenoid valve 'A' circuit poor electrical connection

Tech notes


When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

When is the code detected?


Engine Control Module (ECM) detectes an open or shorted condition on the solenoid circuit

Possible symptoms


  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission shift shock

P0748 Description


The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).
Message édité par rq3zqtb le 02/06/2017 à 13:20:40
Publicité

 Page :
1

Aller à :