Caradisiac® utilise des traceurs (cookies et autres) pour assurer votre confort de navigation, pour réaliser des statistiques de visites ainsi que pour vous proposer des services et des publicités ciblées adaptés à vos centres d’intérêts. En poursuivant votre navigation, vous en acceptez l'utilisation. Pour plus d’informations et paramétrer vos traceurs : En savoir plus

 
Publi info
   / / /

(VW POLO 6r) ICE ICE POLO (ROBolop Design)

 

Ajouter une réponse
 

     
Vider la liste des messages à citer
 
 Page :
1  2  3
Dernière Page
Page Suivante
Page Précédente
Première Page
Auteur
 Sujet :

(VW POLO 6r) ICE ICE POLO (ROBolop Design)

Prévenir les modérateurs en cas d'abus 
rob43lv
Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 17/11/2012 à 17:14:23  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Publicité
I bought a new VW Polo.
This will be used for daily use, and most of the time, my wife will drive it. When we made the decision to buy a daily car, I had to make a promise that I wouldnt lower it, or put bigger wheels on it.
First of all, because she has troubles with her back, and for the rims.it wont be long until shell drive up the sidewalk.
But as for the ice, she had no problems with me doing some adjustments, BUT there had to stay enough room in the trunk at all costs.
The Polo is a 1400 comfortline, with DSG, Airco, Assheating, Cruise Control en some other stuff.
Here a picture from the Polo, just delivered (still with the protective foil on)

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04393_resize_zps210d​9677.jpg
I will take some more pictures once shes washed, but there not much to be seen. Its an original new car.
But maybe some carbon updates will happen, who will know
About the ICE, everything I need is already here.
As for the radio, Im going to keep the original one, but since Im going to use an amp, Ive bought a Pac-Audio interface.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04619_resize.jpg
Im very happy I didnt sell the Precision Power amp I wanted to mount into the bimmer first.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/naamloos-4.jpg
This PPI Deq 230 is a 30band equalizer. I can screw demount the front from this device, and with the longer cable (which is in the box), you can change the settings behind the wheel.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04641_resize.jpg
As for the Subwoofer, I chose for the 4 Focal Utopia 13ws , again
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04631_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04633_resize.jpg
Also the front speakers will be Focals: the KrX3 series

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04620_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04622_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04627_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04624_resize.jpg
The filters.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04629_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04634_resize.jpg
And I also bought some cables and damping materials.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04612_resize.jpg

Sujets relatif

Sujets relatifs
[Polo 6r] [POLO 6N] en modif
<VW POLO 6N2> clean look  
Plus de sujets relatifs à : (VW POLO 6r) ICE ICE POLO (ROBolop Design)

Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 17/11/2012 à 17:15:39  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Finally , I started on the Polo.
I searched the net to find some pictures of what could be hiding behind the carpet, but then I decided to take it all out anyway. Sooner or later, this was inevitable.


The spare wheel, well, that has to stay. The intention is that this stays easily accessible, in case we need it.
In other words, I’m going to make this install so that, in case of a flat tire, my wife can take the wheel easily and safely.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04814_resize.jpg

On the right side you can see there’s not much that can be done here.
It’s the place of the petrol tank, I’d better not cut this open do I ?
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04819_resize.jpg
On the left side I’ve got some more place to work with, but ho wand what, I’m not quite sure.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04818_resize.jpg
Then I placed a piece of MDF on the bottom, and looked what kind of emplacement is possible here.
I was at first a bit disappointed there wasn’t enough room, cause in my case, you can’t have enough room!
The intention is that the sub-box is placed against the rear seats. This will be in favor of the pressure, and also the looks will be much more pretty.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04820_resize.jpg
What I do know is that I’ll place hem under diagonally. The view will be more spectacular and more beautiful, I think.
About the PPI (amplifierà), I’ll have enough space to work away the cables in an appropriate way (L and R)
The equalizer is something else…There’s no room for that. You can see that I got it out of its housing, and I placed it ON the amplifier. It looked OK in my opinion.

But I’m not there yet. First of all I’m going to calculate how many liters are necessary for the subbox, the rest will turn out from its own.

Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 17/11/2012 à 17:16:27  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Because the floor needs to go all the way up before you can access the spare wheel, I had to make a hinge first.
So I started to saw 2 little alu plates of 10mm thick.
Then I screwed them together and drilled 22mm holes in them.
These holes I oppressed with a lager of 22mm.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04825_resize.jpg
Oppress sound really professional, but I did it quite simple
As you can see, I placed the plate between the bench. After that I took a cap, which was a bit smaller than the lager, and then I turned it all together. Simple
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04828_resize.jpg
The result.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04832_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04838_resize.jpg
The alu plates will be mounted on a bracket, which is already in the polo (from the factory)
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04842_resize.jpg
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04844_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04845_resize.jpg

I screwed a bolt through the lager, an M8.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04848_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04855_resize.jpg

Once I did this on both sides, I connected these 2 with a U

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04862_resize.jpg
This U is on the inside 18mm. There Ill place the wood in.
You can also see that the wood will be placed diagonally
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04859_resize.jpg

Publicité

Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 17/11/2012 à 17:16:55  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
This will be the box, that will be mounted in the trunk.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04884_resize.jpg
The 4 holes you see are for the Focal subs (4x13cm).


Another look at how big the sub-box will be.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04877_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04876_resize.jpg

Now you see a MDF-shelf that will part the sub-box from the amplifier area.



About the partition, Im thinking on some cool things, but Im not entirely sure yet


First I had the idea to work in the equalizer in one of the sun-blinders on the seiling, but they were too big for it. Its a pitty, cause I liked the idea myself.
Now Ive been working on the amplifier, and the more I see it, the more it grows on me.
Ill have to make a new sort of high-tec bracket, but that shouldnt be a problem I guess.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04868_resize.jpg



http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04878_resize-1.jpg


Here you can see its possible that I raise the equalizer a couple of more cms, and that too I liked!

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04875_resize.jpg

Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 17/11/2012 à 17:17:30  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Publicité

Chasseur de mazoute
lau13px
Coupe bronze Tuning Tuning - succès argent nombre de vues Tuning - succès bronze sujets
  1. Posté le 17/11/2012 à 17:24:56  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Hello :bien:

I follow :jap:

Very good job :rs:
Message édité par Lau13px le 17/11/2012 à 17:25:33
Vivement l'été...
Profil : Pilote pro
  1. config
964rs92
Coupe bronze Tuning Tuning - succès argent nombre de vues Tuning - succès bronze sujets
  1. Posté le 17/11/2012 à 18:10:16  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Great job, as usual :bien:


---------------
Mon déplaçoir
Invité
cho05pj
Tuning - succès bronze nombre de vues Tuning - succès argent messages
  1. Posté le 17/11/2012 à 20:00:49  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Publicité
nice job clean  :)
Message édité par cho05pj le 17/11/2012 à 21:48:10
Profil : Routard confirmé
  1. config
boubou206
Tuning - succès bronze messages
  1. Posté le 17/11/2012 à 21:44:26  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Very good work as on the bmw  :)


---------------
[:nergalsk8:1]
Nouvelle 308 SW GT Line :love:
Vaut mieux être bourré que con, ça dure moins longtemps [:rallyman69:10]
Profil : Super modo : 10 ans
bisjo
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès or sujets
  1. Posté le 17/11/2012 à 22:26:34  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Why the wood is different for the speakers and the amplifier?
The work is luxurious.
It is of an exemplary cleanliness.


---------------
[:djbenzzz:1]
Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 19/11/2012 à 20:01:43  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Because I’m going to mount the equalizer onto the amplifier, I decided to make an aluminum plate.

First of all I drew out everything on a piece of MDF, 8mm thick.
The MDF will serve as a mold for the actually alu plate.
Here you can see how I started.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04901_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04903_resize.jpg

The piece is finished, and I’m happy with the result.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04904_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04905_resize.jpg

I sawed out the alu plate with the jigsaw, after that I taped it on the MDF.
http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04907_resize-1.jpg

Then I started to mill this with the copymill.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04912_resize.jpg

The result:

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04913_resize.jpg

I just need to sand the edges…

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04915_resize.jpg

Then I mounted the EQ on there with 4 screws, and layed it on the amplifier.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04917_resize.jpg

The busses won’t stay as in this setup. I’m going to let some made on the height I want.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04918_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04919_resize.jpg

Here you can see the amp also stand on “busses”. I did this to work away the cables.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04926_resize.jpg

For the first time, I timed how long I worked on this Aluminum plate.


Drawing on MDF
Mill the MDF
Saw the Alu
Mill out the alu
This all took me about 5 hours…

But as you guys already know, I don’t give a f*k how long it took me, as long as the result is OK for me

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 20/11/2012 à 20:23:07  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
welcome to you! I find your polo very friendly and I love your project, I am the news!

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 20/11/2012 à 20:30:14  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

cho05pj a écrit :

nice job clean  :)
Afficher plus
Afficher moins

you know you speak English?
 :p

Publicité

Invité
cho05pj
Tuning - succès bronze nombre de vues Tuning - succès argent messages
  1. Posté le 20/11/2012 à 20:55:32  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

Dam41ak a écrit :

you know you speak English?
 :p
Afficher plus
Afficher moins

yes a little  :p

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 20/11/2012 à 21:03:48  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
ok you're a good guy then ...

it's nice polo  :d

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 23/11/2012 à 21:14:53  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
more news?

Profil : Pilote semi-pro
  1. config
neoxide38
Tuning - succès or nombre de vues Tuning - succès or messages
  1. Posté le 24/11/2012 à 22:24:39  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Amazing!! Very good job :jap:


---------------
Just here for fun...
"Quattro addicted"
Profil : Pilote d'essai
  1. homepage
  2. config
golf-4-addicted
Coupe bronze Tuning Tuning - succès argent nombre de vues Tuning - succès bronze sujets
  1. Posté le 25/11/2012 à 10:44:44  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Still an awesome job :eek::love:


---------------
Audi A5 S Line 3L V6 tdi 240 Quattro S-Tronic, GPS advanced, Keyless Go, Toit ouvrant, sièges S5.
Mon A5 S Line Ma Yamaha YZF 125 Burning Blue
Ni dieu Ni maitre
Profil : Pilote semi-pro
  1. config
dingoto
Tuning - succès bronze sujets Tuning - succès bronze messages
  1. Posté le 28/11/2012 à 17:19:33  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
[smileyper​so


---------------
[:rc78] clio blanc glacier [:rc78] DIESEL Fuel For Life [:a-k-t]
Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 29/11/2012 à 11:23:42  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
Here you see what I’ve done to work away the cables in an easy and fast way.
Close to the bottom of the amp, I made 2 oval holes (L and R)

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04942_resize.jpg

On the bottom side I milled out a big sloth to place the cables in.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04951_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04947_resize.jpg

Once I placed the cables there, I’m going to screw a thin plate on there so the bottom side will look descent too.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04945_resize.jpg

I chose glass to work out the separation between the sub-box and the amplifier.
The glass is hardened, 12mm thick.
I chose this solution, so it will maybe look bigger, cause it’s all in one space.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04934_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04933_resize.jpg

I milled out a ditch on the left and the right.
Then I let someone bend me a lip on the alu of the amp and subbox.
The glass rests between them. Offcourse I’m going to kit it all off when the subbox is closed.

Off course I need to have some material left and right to screw the box tight.
This I’ll solve by glueing an aluminium bar against the glass.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04956_resize.jpg

Here you can see that this bar is also tightened left and right.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04954_resize.jpg



In that alu I can tap screwthread to screw my cover on. On the side I’ll place long woodbolts and on the back (hinge) I need to straighten it out with polyester, then it’s possible I also tap in some screwthread.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04956_resize.jpg

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 29/11/2012 à 19:19:36  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
still good job! it's nice to see

congratulations

Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 01/12/2012 à 14:16:59  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
I changed the plate which is on the amplifier. I widened it a bit more.
I also added a second plate underneath it. I’ve done this to give it a more tough look.
The sides of the thick plate will get polished, and the thin plate will be sprayed in black.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04927_resize.jpg

On the sides I foresaw other plates with fine openings.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04960_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04959_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04957_resize.jpg

About those openings, this will provide some more cooling for the amp, and off course look even better.
You can also see that the plate is placed on 4 rubbers, ON the amp.
On the outside I will add 4 alu busses, but need to let them make first.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04962_resize.jpg

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 01/12/2012 à 14:57:17  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
a really good job, I look forward to see the outcome

it begins to take shape :D
Message édité par Dam41ak le 01/12/2012 à 14:58:42
Invité
rob43lv
Tuning - succès argent nombre de vues Tuning - succès bronze messages
  1. Posté le 03/12/2012 à 17:32:27  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
This time I won’t be working with copper for the connection of the Focal Subs. When I started this project, I said I was going to keep it basic….and I’m getting the feeling it’s getting a bit out of hand again .

I want to show with this connection , that you can make beautiful and good things with simple stuff.

First I let a friend make me a couple of aluminium busses.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04976_resize.jpg

Then I took an aluminium rectangular bar from 10mm on 15mm.
Once I perfectly measured where the holes need to be, I drilled all holes with a pillar drill machine.
This was for me the best way to drill the holes STRAIGHT.
Then I taped a lath in the subbox, and drilled the holes into the wood.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04972_resize.jpg

You can see, that I when I drilled a hole, I let the drill stay into the hole. That way the lath can’t go anywhere, and it all stays on 1 line.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04971_resize.jpg

Here you can see the alu bar, with the busses underneath.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04981_resize.jpg

The bar is mounted on 3 places with normal inbus-screws, which are sunken in. These inbus-screws you will see everywhere in this install.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04979_resize.jpg

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04986_resize.jpg

Where the connection of the speaker will come, you can see holes of 8mm. Here will a little anodized aluminium tube will be placed, where the cable will run through.
When you look closely onto the picture, you can see I made big holes on the backside, and provided them with screwthread. Here will come an adjusting screw of M4 onto the little alu tube, so it’ll keep it’s place. And be doing this I’m sure that it won’t go vibrating cause of the subbox’ pressure.

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/RADIO/VW%​20Polo/DSC04988_resize.jpg

I need to order the alu busses cause they aren’t in stock.
They’ll be delivered next week.

I also hope that the temperature will go up a bit, cause where I’m working now, there’s no heating. And for those little works, it’s freeeeeeezing on my hands (and the rest)

http://i82.photobucket.com/alb​ums/j272/robola/GIFS/smiley_co​ld.gif

Invité
ton73pr
Tuning - succès bronze messages
  1. Posté le 03/12/2012 à 18:28:41  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
hello robolop [smileyper​so

it's very good install and beautiful matérial [smileyper​so i see to diymobil audio  ;)

sorry not speak english is not very perfect  :d [smileyper​so

putain comment j'suis lamentable en englais c'est horrible [smileyper​so

Invité
cho05pj
Tuning - succès bronze nombre de vues Tuning - succès argent messages
  1. Posté le 03/12/2012 à 18:50:29  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

Ton73pr a écrit :

hello robolop [smileyper​so

it's very good install and beautiful matérial [smileyper​so i see to diymobil audio  ;)

sorry not speak english is not very perfect  :d [smileyper​so

putain comment j'suis lamentable en englais c'est horrible [smileyper​so
Afficher plus
Afficher moins

[smileyper​so[smileyper​so +1

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 03/12/2012 à 18:51:53  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
with any these pregnant, itgoing turn of thunder I hope you will do us a little video of his once installed  :d

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 03/12/2012 à 18:55:07  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

cho05pj a écrit :

[smileyper​so[smileyper​so +1
Afficher plus
Afficher moins

do not laugh choupi the poor, we are all zero in English [smileyper​so

Invité
ton73pr
Tuning - succès bronze messages
  1. Posté le 03/12/2012 à 19:11:04  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
M D R !!!

(t'abuse damien j'méritte au moins 5/20 :lol::lol: )

Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 03/12/2012 à 19:14:44  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

Ton73pr a écrit :

M D R !!!

(t'abuse damien j'méritte au moins 5/20 [smileyper​so[smileyper​so )
Afficher plus
Afficher moins

[smileyper​so je sais pas ça ce mérite [smileyper​so[smileyper​so

Invité
ton73pr
Tuning - succès bronze messages
  1. Posté le 03/12/2012 à 19:17:47  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
[smileyper​so[smileyper​so
le pire c'est que au college j'avais 16/20 en englais :oui::cyp:
Message édité par Ton73pr le 03/12/2012 à 19:22:34
Modérateur Violette
dam41ak
Coupe bronze Tuning Tuning - succès bronze nombre de vues Tuning - succès bronze sujets
  1. Posté le 03/12/2012 à 19:53:48  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
bah c'est pas mal  ;)

Vivement l'été...
Profil : Pilote pro
  1. config
964rs92
Coupe bronze Tuning Tuning - succès argent nombre de vues Tuning - succès bronze sujets
  1. Posté le 04/12/2012 à 10:22:06  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

Dam41ak a écrit :

with any these pregnant, itgoing turn of thunder I hope you will do us a little video of his once installed  :d
Afficher plus
Afficher moins


Traduction : avec toutes ces femmes enceintes, "itgoing" tourne du tonnerre j'espère tu nous feras une petite video du siens quand installé :eek::lol:

Message édité par MasterLudo le 01/10/2015 à 09:19:28

---------------
Mon déplaçoir
Invité
ton73pr
Tuning - succès bronze messages
  1. Posté le 04/12/2012 à 11:14:55  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 
ah ben finalement j'était pas si mauvais que sa ! lol :ddr::lol:

Invité
cho05pj
Tuning - succès bronze nombre de vues Tuning - succès argent messages
  1. Posté le 04/12/2012 à 11:26:23  
  2. answer
  1. Prévenir les modérateurs en cas d'abus
 

Ton73pr a écrit :

ah ben finalement j'était pas si mauvais que sa ! lol [smileyper​so[smileyper​so
Afficher plus
Afficher moins

[smileyper​so

Publicité

 Page :
1  2  3
Dernière Page
Page Suivante
Page Précédente
Première Page

Aller à :
 


Les 5 sujets de discussion précédents Nombre de réponses Dernier message
clio 1 tuning 23
[projet corsa b ] 91
[Citroën Ax] Préparation complète 17" 865
[Vitz RS Project - Yaris TS] Vidéos Circuit - Clastres - P106 3687
BMW E30 318i Touring 19