(VW POLO 6r) ICE ICE POLO (ROBolop Design)

[Invité §mic826Zn]

Traduction : avec toutes ces femmes enceintes, "itgoing" tourne du tonnerre j'espère tu nous feras une petite video du siens quand installé http://forum-auto.caradisiac.com/static/icones/smilies/eek.gifhttp://forum-auto.caradisiac.com/static/icones/smilies/lol.gif

Je suis pas fortiche en englais mais quand j'ai lu "with any these pregnant" je me suis tordu de rire

 

Mauvais traducteur

 

Nice job robolop!

[Invité §Dam437Kp]

alors les gars "PREGNANT=ENCEINTE"

 

FEMME=WOMAN donc dite mois à quel moment j'ai écris WOMAN?

[Invité §Dam437Kp]

Traduction : avec toutes ces femmes enceintes, "itgoing" ça vas tourné du tonnerre j'espère que tu nous feras une petite video du siens son quand une fois installé http://forum-auto.caradisiac.com/static/icones/smilies/eek.gifhttp://forum-auto.caradisiac.com/static/icones/smilies/lol.gif

bon à savoir: l'anglais se traduis très mal en français vous avez due loupé ce chapitre à l'école

 

Good to know: English translates very badly in French

[Invité §Ton860Nr]

the traduction is good

[Invité §Dam437Kp]

[Invité §fie346Ci]

where is Brian??? Brian is in the kitchen...

[Invité §Lau237ez]

What do you use to elevate the PPI?

 

It's for my PPi PCX480

[golf 4 addicted]

bon à savoir: l'anglais se traduit très mal en français vous avez dû louper ce chapitre à l'école

 

Good to know: english is hard to translate in french

 

 

Toi, il n'y a pas que l'anglais que tu as loupé à l'école.

[Invité §Dam437Kp]

 

tu cherche la petite bête la, abuse pas quand même on me comprends très bien, contrairement à certain sur le forum

[golf 4 addicted]

[Invité §mic826Zn]

alors les gars "PREGNANT=ENCEINTE"

 

FEMME=WOMAN donc dite mois à quel moment j'ai écris WOMAN?

Tu aurais du utilisé le terme speakers

 

C'est moins confus

[Invité §Dam437Kp]

c'est vrai que haut-parleurs ça sonne mieux http://forum-auto.caradisiac.com/static/icones/smilies/lol.gif

[964rs92]

alors les gars "PREGNANT=ENCEINTE"

 

FEMME=WOMAN donc dite mois à quel moment j'ai écris WOMAN?

 

 

Je serais d'accord avec toi... si seulement en Anglais "enceinte" voulait dire autre chose qu'"attendre un bébé" http://forum-auto.caradisiac.com/static/icones/smilies/lol.gif

 

Robolop : We need more pics, just to see your amazing work http://forum-auto.caradisiac.com/static/icones/smilies/jap.gif

[Invité §bis741vc]

Je suis pas fortiche en englais mais quand j'ai lu "with any these pregnant" je me suis tordu de rire

 

Mauvais traducteur

 

Nice job robolop!

 

pareil

[Invité §bob630DS]

hello Robolop http://forum-auto.caradisiac.com/static/icones/smilies/hello.gif

 

sorry my english is very bad. We don't have often the opportunity to follow a foreign's project

 

You have make a very good job , many idea, many material.

 

Impatient to see more...

 

I put your topic in my favorite

[Invité §Dam437Kp]

bon ça va les modo hein

[Invité §bob630DS]

bon ça va les modo hein

 

 

What you say ?

 

We speak in english in this topic for that Robolop understand well

[Invité §Dam437Kp]

we try to speak English, finally for me, thank you google translation

[Invité §rob674AK]

I grabbed the mill from out the cupboard and started making some sloths on the bottomside (for the cables from the subs)

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC04991_resize.jpg

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC04996_resize.jpg

 

Then I started making frames where the glass will rest on. This alu plate is about 3mm thick.

Then I sanded it down, and drew it out.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC04999_resize.jpg

 

Then I cut away as much as possible with the jigsaw. Because it’s impossible to saw straight with a jigsaw, I milled the last mm.

Pretty easy to do.

 

 

It’s superimportant that the aluminium is taped to the table. I did it with dubbel sided tape.

You can also see that the plate is laying against some nails. I knock them qual to the top of the plate, so the mill doesn’t flip when I go over them.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05001_resize.jpg

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05003_resize.jpg

 

And a lath which functions as a glider for the mill.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05006_resize.jpg

 

This looks pretty smooth and easy, but when you look at the clock, hours pass by. But I don’t care about the time.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/beavis-butthead-1.gif

[Invité §Dam437Kp]

It was on! this is long to do, but great job

[Invité §Lau237ez]

What do you use to elevate the PPI?

 

It's for my PPi PCX480

 

 

Nice Job http://forum-auto.caradisiac.com/static/icones/smilies/jap.gif

[Invité §bob630DS]

I don't understand all the explications, but i see that you make a very nice job

[Invité §330221CZ]

Nice work robolop, it looks promising

[Invité §rob674AK]

Great job, as usual

 

 

nice job clean

 

 

Why the wood is different for the speakers and the amplifier?

The work is luxurious.

It is of an exemplary cleanliness.

 

 

welcome to you! I find your polo very friendly and I love your project, I am the news!

 

 

Amazing!! Very good job http://forum-auto.caradisiac.com/static/icones/smilies/jap.gif

 

 

Still an awesome job http://forum-auto.caradisiac.com/static/icones/smilies/eek.gifhttp://forum-auto.caradisiac.com/static/icones/smilies/love.gif

 

 

still good job! it's nice to see

 

congratulations

 

 

a really good job, I look forward to see the outcome

 

it begins to take shape

THX DUDE's.

[Invité §rob674AK]

hello Robolop http://forum-auto.caradisiac.com/static/icones/smilies/hello.gif

 

sorry my english is very bad. We don't have often the opportunity to follow a foreign's project http://forum-auto.caradisiac.com/static/icones/smilies/non.gif

 

You have make a very good job , many idea, many material.

 

Impatient to see more...

 

I put your topic in my favorite

 

 

THX DUDE

 

i du my best.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/bikini.gif

[Invité §bob630DS]

http://forum-auto.caradisiac.com/static/icones/smilies/jap.gif

[Invité §rob674AK]

Cause of the cold this week, I didn’t manage to do much. Where I’m working at the moment, there’s no heating, and you can feel the cold comin’ out of the ground. There are nicer days to work on an install.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/smiley_cold.gif

 

The 2 alu frames (for the glas to rest on) are finished. On the back of the subbox, where the hinge is placed, I had to weld an extra iron.

After that I drilled a LOOOOOOOOOOOOOOT of holes in the aluminium, and also in the iron and alu bar. After that I made some screw-thread in there so I could tighten it all nicely. Remember, the subbox needs to be 100% closed.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05017_resize.jpg

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05015_resize.jpg

 

Once the holes were good, I taped the glass onto the aluminium.

I chose 2x4mm laminated glass. This is the same as the glass that’s in your front windshield of your car. I chose this because it’s superstrong, be also, must it ever break, the shattered pieces won’t fall apart, due to the special film that’s in between.

You never know the glass will burst after my wife plants a bag of potatoes into the trunk, then it won’t be the end of the world… just needs a new glass.

 

I glued the glass with black TEK7.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05052_resize.jpg

 

I left this to dry for more than four days, and it still wasn’t dry. Probably because it’s cold and moist in my garage for the moment.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05053_resize.jpg

 

Then I worked on the connections of the woofers.

 

Here you can see the 8 alu tubes where the cable gets through. You can also see LED holders, and little O-rings.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05058_resize.jpg

 

First of all, I glued the led holders into the alu tubes with 2 components-glue

Because my cable didn’t got through anymore, I had to abrade the LED holders one by one till the cables got through again.

F*CKN JOB...

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05059_resize.jpg

 

Another shitty job was that I had to sand down the inside of the holes, where the tubes glide through.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05065_resize.jpg

 

 

Once all this was done, I could place the tubes through the holes without scratching it.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05071_resize.jpg

 

You can also see the O-rings I slipped over it, to get a nice finishing touch.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05083_resize.jpg

 

With these connections I want to prove that it doesn’t always have to be copper, and you can make nice things with normal stuff.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05084_resize.jpg

 

Here you see how the glass rests on the subbox, and how it’s screwed. Offcourse I’m going to place rubber in between to get a more perfect seal.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05109_resize.jpg

 

The glass on the amplifier part: This will be tightened with a couple of screws, so if I have to turn the EQ, it’s just a matter of screwing some screws loose.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05109_resize.jpg

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05108_resize.jpg

 

Another cool shot

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05105_resize.jpg

[Invité §Ton860Nr]

http://forum-auto.caradisiac.com/static/icones/smilies/love.gif very nice

[Invité §Lau237ez]

http://forum-auto.caradisiac.com/static/icones/smilies/miam.gifhttp://forum-auto.caradisiac.com/static/icones/smilies/miam.gif

[Invité §car437mp]

very good job!!!!

 

[Invité §bob630DS]

amazing http://forum-auto.caradisiac.com/static/icones/smilies/eek2.gif

[Invité §bis741vc]

 

 

 

 

Sorry, but it isn't clean.

[Invité §rob674AK]

Exiting day today.

 

I mounted the box into the trunk. I used every inch possible in there, but I had a good feeling when I let the thing go up and down.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05124_resize.jpg

 

I had to do a minor adjustment with the hammer. The box didn’t go (only for a couple of mm) by the eyes on the back of the trunk

 

STOP- Hammertime! lol

 

You can see how close it all is.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05126_resize.jpg

 

I also changed something on the hinge and now I need to finish it off.

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05120_resize.jpg

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05121_resize.jpg

 

When the trunk is up to gain access to the spare wheel, I need to flatten out the back seat

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05123_resize.jpg

 

 

I think the spare wheel is easy accessible, no?

 

http://i82.photobucket.com/albums/j272/robola/GIFS/RADIO/VW%20Polo/DSC05122_resize.jpg

[Invité §rob674AK]

 

 

 

 

Sorry, but it isn't clean.

You’re right, but I need to disappoint you a bit.

What you didn’t see is that the alu rings of the Focal’s are still dirty, and the alu bar where the tubes go through isn’t finished yet.

I also didn’t work on the sides of the box yet.

With this picture I checked out if it looked good. When you look even closer, you can see that the 2 alu tubes are put a bit deeper.

I thought it was more beautiful. The other 3 are a bit higher, and then the cable doesn’t look that good imo.

It’ll turn out fine, but still thanks for your comments.

If you have any comment on something that’s finished already, just shoot, I’m far from mister perfect.

 

 

[Invité §bis741vc]

 

 

You understand my paint ?

This is better i think.

It's my idea.