Probleme clime sur crv

[Invité §Eug257av]

J'ai besoin du aide

Le bouton DUAL clignote, et la clime marche pas! Clime rechargez le 24.05, merci

[jja69]

bonjour,

 

il y a une manip a faire

 

En français:

- coupe le contact

- appuie et reste appuyé sur "Auto" et "Recyclage"

- allume le contact

 

 

CiterThe climate control unit has a self-diagnostic function. To run the self-diagnostic function, do the following:

 

1. Turn the ignition switch OFF.

 

 

2. Press and hold the AUTO and recirculation buttons, and turn the ignition switch ON (II).

 

 

3. ALL LCD segments turn on for 2 seconds, then self-diagnostic function begins.

 

NOTE:

The blower motor will run at any speed regardless of what the panel is displaying.

If there is any problem in the system, the temperature indicator will light up the segment (A through P) and AUTO indicator corresponding to the error. The temperature indicator will then alternate every second between displaying ‘‘88'' (all segments lit) and the error code segment (A through P) and AUTO indicator. To determine the meaning of the DTC, refer to checking for DTCs.

If there are no problems detected, the segments will not illuminate, and the system will appear to be turnedsource forum honda AOS